Skip to main content

Menu

12V 5A SLA Battery Charger - Suits 20AH and above Batteries

BC1216
12V 5A SLA Battery Charger - Suits 20AH and above Batteries

$110.00

QTY Price
1 $110.00

Description

This 12V 5A SLA Battery Charger is a compact, robust, and lightweight battery charger. It gives a complete and fast charge to a sealed and wet types of lead acid battery.

In the Bulk Charge Stage, it charges the battery at a constant maximum current. Once the battery voltage increases to a slightly higher level, it switches to the Absorption Mode. The battery stays at this voltage while the charging current decreases to a low value.

When the battery is fully charged, the charger is then switched to the Floated Charge voltage. Here it can be maintained indefinitely. In the Float Charge Mode, the charger will make up for the loss of self-discharge of the battery.

This 5A SLA Battery Charger has two selections to cover a wide range of sealed (VRLA) and wet types of lead-acid batteries. It has standard short circuit, overload, and over temperature protection. Also electronic reversed polarity protection, output over-voltage protection, and battery low voltage protection to prevent damage to the charger and the battery.

Features

  • 3 Stage (IUOU) Switching Mode Lead Acid Battery Charger.
  • 2 Selectable Bulk Absorption-Float Charge Settings for Sealed & Wet battery.
  • LED indicators for charging and Full/Float mode.
  • Battery Under-Voltage Protection. When voltage of the charged battery is less than 7.5V, the charger will stop charging the battery which may be of wrong rating (6V) or faulty or heavily exhausted battery.
  • Protections to the charger and battery. Output Short Circuit, Over Load, Over Temperature, Reverse Polarity.
  • Protection to the battery. OVP (Over Voltage Protection) the charger will cut off output when output voltage is over 15.5V, this allows complete protection of the battery.
  • Wide Input Tolerance for fluctuating mains voltage.

Specifications

AC Input Voltage

180-260V 50Hz

AC Input Current at full load at 230VAC

0.8A

Output (Charge) Voltage Selections (2 Battery Type)

Sealed Battery Absorption

14.1V to 14.4V

Sealed Battery Float

13.2V to 13.5V

Wet Battery Absorption

14.1V to 14.4V

Wet Battery Float

13.4V to 13.7V

Max. Output Charging Current (Continuous)

5A

Line Regulation (180V to 260V) for Charging Current

0.6%

Ripple and Noise (Peak to Peak)

120mV

Efficiency at Maximum Power

84%

Protection

Short Circuit Protected

Yes

Overload Protection

Yes

Reverse Polarity Protection

Yes

Over Temperature Protection

Yes

Output Over Voltage Protected (OVP)

Yes

Battery Under Voltage Protection

Yes (when battery voltage <7.5V, charger will stop charging battery)

General

CE Approvals and Standard

EN 60335, EN 55014

Charge Indication

1 LED, Red: Charging, Green: Full or Float

Anodised Aluminium Casting

Yes

Dimensions (W x H x D)

142 x 75 x 32mm

Weight

380g

Included Accessories

2x Clip-on mounting brackets, 4x mounting screws, 4x push-on feet

Recommended Battery Capacity Range

20AH to 50AH

You Might Also Like

All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.
Products may differ from pictured.
All trademarks and trade names are the properties of their respective owners. Wiltronics disclaims any proprietary interest in trademarks and trade names other than its own.

We use cookies to ensure you have the best experience on our site. If you continue to use this site you consent to the use of these cookies. OK

Find out more in our Privacy Policy