Kitronik Clippable Detector Board V1.0 for BBC Micro:bit
KT5678
![Kitronik Clippable Detector Board V1.0](https://www.wiltronics.com.au/wp-content/uploads/images/make-and-create/kt5678-kitronik-clippable-detector-board.jpg)
$9.00
QTY | Price |
---|---|
1 | $9.00 |
10 | $8.55 |
25 | $8.10 |
![Kitronik](https://www.wiltronics.com.au/wp-content/themes/wiltronics/images/kitronik.png)
Description
The Clippable Detector board for the BBC micro:bit detects light, objects and can follow lines. It is compatible directly with the BBC micro:bit and some Kitronik boards, such as the Klip Motor Board.
The board uses phototransistors to detect the reflectiveness of various surfaces, and this board has 3 phototransistor sensors evenly spaced apart. The sensors supply the BBC microbit with an analog voltage. For full operation, it requires five connections. These connections match those on a BBC micro:bit and you can attach them with bolts or croc-clip leads.
Coding MakeCode Blocks:
Kitronik has produced a set of custom MakeCode blocks for the Clippable Detector board. To add them to the editor, select the cog icon in the top right of the editor. Then, select Extensions from the drop-down menu, and in the search bar type and enter Kitronik. Pick the tile from the list and the new blocks will be added to the menu in the editor.
Coding MicroPython:
It is also possible to use MicroPython to write code for this board. For MicroPython example code visit our GitHub page here.
Requires:
- BBC micro:bit
- Micro USB cable
- Crocodile clip-leads, if not bolting the board directly to the microbit
Features
- Use the board to detect light, objects, or to follow lines
- The board is fitted with 3 phototransistors that detect the reflectiveness of different surfaces
- You can also code it with MicroPython
- Kitronik created custom MakeCode blocks to make the job of coding as easy as possible
- Connect the board directly to the micro:bit or connect using crocodile clip leads
Specifications
Operating Voltage (Vcc)
2V - 5.5V
Number of output channels
3
Max Current (at 3V)
54mA
Pin P0
Sensor analog output
Pin P1
Sensor analog output
Pin P2
Sensor analog output
3V
Voltage supply
GND
Ground connection
Dimensions
Length
77 mm
Width
20 mm
Height
2.8 mm
Mounting Hole Diameter
3 mm
Resources
- Kitronik Clippable Detector Board V1.0 for BBC Micro:bit Datasheet
- For the MicroPython example code visit our GitHub page here
You Might Also Like
All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.
Products may differ from pictured.
All trademarks and trade names are the properties of their respective owners. Wiltronics disclaims any proprietary interest in trademarks and trade names other than its own.