Serial To Ethernet Converter RS232/ 422/ 485/ Modbus
ATD4231
$69.95
| QTY | Price |
|---|---|
| 1 | $69.95 |
Description
The Serial to Ethernet converter is an easy way to send serial RS232/422/485 signals over an Ethernet network, allowing you to control equipment over longer distances than traditional serial cables. This gadget allows for remote control and configuration via a user-friendly web-based interface, improving usability and accessibility.
Features
- Supports auto-MDI/MDIX
- Supports TCP/IP server, TCP/IP Client & UDP
- Baud rate 300bps-230400bps
- Supports Modbus RTU
- Reload function
- RS485 supports full duplex and half duplex
Specifications
Chipset
IP210
Ports
1 port 10/100M Auto MDI-MDIX RJ45, 1port RS232, 1port RS485/422
Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3az
Network
10Base-T, cat3 or above UTP, 10Base-Tx, cat5 UTP
Data rate
10/100M
Forwarding rate
10 Mbps / 14,880 pps, 100 Mbps / 148,800 pps
LED Indicators
Link/Act, Power, System, TX/RX
Baud rate
110bps~256000bps
Operation modes
Operation modes
Power Input
9V-54V DC
Power Consumption
Max 1.8W
Operating Temperature
-10°C to 55°C
Relative Humidity
10%-90% (non-condensing)
Device Defaults
ID
admin
Password
system
IP address
192.168.2.1
Operation mode
TCP server
Transmission Mode
RS232
Baud rate
57600bps
UART parameters
57600, 8, N, 1
Local port
TCP 23, UDP 21
Warranty
12 months
Dimensions
Weight
86 mm
Height
84 mm
Depth
25 mm
Resources
You Might Also Like
All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.
Products may differ from pictured.
All trademarks and trade names are the properties of their respective owners. Wiltronics disclaims any proprietary interest in trademarks and trade names other than its own.