Micron Lead Acid 12V Battery Tester
ATQ3215
$59.95
QTY | Price |
---|---|
1 | $59.95 |
Description
The Micron Lead Acid 12V Battery Tester provides quick and easy verification of 12V SLA, wet cell, gel cell, and AGM batteries. Simply connect the croc clip test leads, select the battery capacity (5Ah to 80Ah), and a 20A test load is applied. If voltage drops, the tester indicates either ‘insufficient charge’ or ‘defective cell.’
Supported capacities include 5Ah, 10Ah, 20Ah, 30Ah, 40Ah, 50Ah, 60Ah, 70Ah, and 80Ah. Note that 7Ah batteries are not compatible.
IMPORTANT: Use this device only once every 5 minutes due to the intense heat generated during testing. Overuse may lead to device failure.
Features
- Reverse polarity protection
- Capacity selection 5Ah-80Ah
- Voltage display
- Three status LEDs
- One-touch load testing
- Powered by battery being tested
You Might Also Like
All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.
Products may differ from pictured.
All trademarks and trade names are the properties of their respective owners. Wiltronics disclaims any proprietary interest in trademarks and trade names other than its own.