74HC374 Tri-State Octal D Flip/Flop
74HC374
$1.26
QTY | Price |
---|---|
1 | $1.26 |
10 | $1.13 |
25 | $0.91 |
Description
The 74HC374 is a Tri-State Octal D Flip/Flop with CMOS input level. The device has a clock (CP) and output enable (OE) inputs. On the LOW - to - HIGH clock (CP) transition, the flip flops will store the state of their individual D - inputs that meet the set-up and hold time requirements. A HIGH on OE causes the outputs to go into a high - impedance OFF - state. The operation of the OE input has no effect on the state of the flip-flops. Inputs also include clamp diodes, allowing the use of current-limiting resistors to interface inputs to voltages greater than VCC.
Features
- Buffered Inputs
- Common Three-State Output Enable Control
- Three-State Outputs
- Bus Line Driving Capability
- Balanced Propagation Delay and Transition Times
- Significant Power Reduction Compared to LSTTL Logic ICs
- CMOS input level
Specifications
Pins
20
Operating Temperature
-55°C - 125°C
Load Capacitance
50.0 pF
Supply Voltage
5 V
Package Code
DIP
Dimensions
Length
26.73 mm
Width
7.62 mm
Terminal Pitch
2.54 mm
You Might Also Like
All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.
Products may differ from pictured.
All trademarks and trade names are the properties of their respective owners. Wiltronics disclaims any proprietary interest in trademarks and trade names other than its own.