74HCT374 Tri-State Octal D Flip/Flop
74HCT374
$0.88
| QTY | Price |
|---|---|
| 1 | $0.88 |
| 10 | $0.77 |
| 25 | $0.66 |
| 100 | $0.55 |
Description
The 74HCT374 is a Tri-State Octal D Flip/Flop with TTL input level. The device has a clock (CP) and output enable (OE) inputs. On the LOW - to - HIGH clock (CP) transition, the flip flops will store the state of their individual D - inputs that meet the set-up and hold time requirements. A HIGH on OE causes the outputs to go into a high - impedance OFF - state. The operation of the OE input has no effect on the state of the flip-flops. Inputs also include clamp diodes, allowing the use of current-limiting resistors to interface inputs to voltages greater than VCC.
Features
- Wide supply voltage range from 2.0 to 6.0 V
- CMOS low power dissipation
- High noise immunity
- TTL input level
- Complies with JEDEC standards: JESD8C (2.7 V to 3.6 V) / JESD7A (2.0 V to 6.0 V)
- Non-inverting 3-state outputs
- 8-bit positive, edge-triggered register
- Common 3-state output enables input
- Independent register and 3-state buffer operation
- Octal bus interface
Specifications
Package
DIP
Number of Terminals
20
You Might Also Like
All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.
Products may differ from pictured.
All trademarks and trade names are the properties of their respective owners. Wiltronics disclaims any proprietary interest in trademarks and trade names other than its own.