Alloy FCR200SC.40 100Mbps Standalone/Rackmount Media Converter
CM-FCR200SC.40
$363
| QTY | Price |
|---|---|
| 1 | $363 |
Description
The Alloy FCR200SC.40 media converter is one of the FCR200 Series of Fast Ethernet Media Converters and has a variety of installation choices. You can use it as a standalone device, or install it in an Alloy DCR12 Series 12-slot Media Converter Chassis.
The Alloy FCR200SC.40 media converter has dual 100Base-TX auto-sensing 10/100Mbps RJ-45 and 100Base-FX SC terminated single-mode ports utilising the 1300nm wavelength (1550nm models also available). It is capable of supporting fiber cable connections of up to 40 km, making it an excellent choice for extending network connectivity over long distances. The Alloy FCR200SC.20 is an ideal solution for UTP/STP copper to Fast Ethernet single-mode fiber media conversion tasks.
The Link Fault Passthrough (LFP) function of the FCR200 Series Converters allows them to monitor both fiber and copper RX ports for signal loss. If a signal is lost on one port, the Converter will block the TX signal to the other port, indicating the link fault state. This functionality is available in both Far-end-Fault (FEF) and Forced Modes (FM).
FEF mode disables the transmission of link pulses to the LFP-capable Converter at the other end of the cable, preventing data loss over an invalid link. Combining FM and FEF LFP functionalities improves troubleshooting and network security by notifying end devices and the managed switch attached to the FCR200 Series Converter of a lost fiber link and allowing them to take appropriate action.
Features
- FCR200SC.40 model: Fast Ethernet copper to 100Base-FX 1300nm singlemode fibre media conversion - 40Km range
- Compact, rugged all-metal case
- FCR200 Series: Fast Ethernet copper to multimode, single-mode, and WDM Media Conversion solutions
- FCR200 Series: models with copper to 1300nm and 1550nm single-mode fiber support
- LC, SC, ST, and MT-RJ fiber connectors supported on individual FCR200 Series models
- Up to 100 kilometers fiber range supported with FCR200 Series Converters
- Easy 'Slide-in, Hot Swap' installation into DCR12 Media Converter Chassis systems
- Supports Forced and Far-end Fault mode Link Fault Passthrough (LFP)
- All FCR200 models are powered by an external plug pack or via a USB connection
- Dual Purpose FCR200 Series - use 'standalone' or install in a DCR12 Series Media Converter Chassis
Resources
- Alloy FCR200SC.40 - Alloy - FCR200 Series Media Converters - Datasheet
- Alloy FCR200SC.40 - Alloy DCR Series Media Converters - Datasheet
You Might Also Like
All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.
Products may differ from pictured.
All trademarks and trade names are the properties of their respective owners. Wiltronics disclaims any proprietary interest in trademarks and trade names other than its own.