Standard SC05 Sound Level Calibrator (for ST8852)
ME5596CAL
$195.00
QTY | Price |
---|---|
1 | $195.00 |
Description
The Standard SC-05 Sound Level Calibrator provides 94dB and 114dB signals for sound calibration at 1kHz. Designed for accuracy and ease of use, it fits 1/2″ diameter microphones.
Procedures:
- Insert the microphone under test into the calibrator's microphone cavity, and ensure it is fully inserted (Sound level meters with 1/2″ ± microphones can be calibrated with this device).
- Slide the range switch to the 94dB position, or the 114dB position as desired. The calibrator generates its signal as soon as the switch is set.
- Read the sound level meter's value. The sound level meter should read 94dB or 114dB depending on the calibrator's signal level. If the sound level calibrator does not match the calibrator's signal (within specification), adjust it as explained in the sound level meter's operating instructions.
- Slide the range switch to the °OFF ± position and remove the microphone.
Battery replacement
- Please replace the battery when there is no sound pressure output
- Open the battery cover to access the 9V battery
- Remove the old battery and replace it with a new 9V battery
Specifications
Output sound pressure levels
114dB and 94dB
Output frequency
1000Hz 4%
Reference conditions
Temperature 23 C (73 F) ,1013 mbar,65%RH
Accuracy
0.5dB
Power
One 9V battery, 006P or IEC 6F22 or NEDA 1604
Low Battery check
The calibrator will cut sound pressure output if the battery voltage falls below acceptable range
The instrument complies with
IEC 942 CLASS 2
Dimensions
Weight
130 g
Length
120 mm
Width
51 mm
Height
43 mm
You Might Also Like
All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.
Products may differ from pictured.
All trademarks and trade names are the properties of their respective owners. Wiltronics disclaims any proprietary interest in trademarks and trade names other than its own.