Skip to main content

Menu

We will be closed from December 25th to January 2nd
You can still place orders via the web, however dispatch will not occur before the 2nd of January.

RedBoard PTH Kit by Sparkfun

ARD5-10908
Photo of a Sparkfun RedBoard PTH kit.

$30.00

QTY Price
1 $30.00

Description

This Sparkfun Redboard PTH kit contains everything you need to build your very own Uno-compatible RedBoard development board! Simply follow the Assembly Guide and after some basic soldering, you'll have made a fully-functional Arduino compatible development board. The included ATmega328 comes pre-loaded with the Optiboot bootloader so you don't have to worry about loading the firmware. You can simply solder it together, connect an FTDI Basic, and load your favorite sketch!

After the board is assembled, it can be powered by an FTDI connection or a regulated 6-15VDC power supply connected to either the DC barrel jack or the new JST footprint.

Note: You will need either an FTDI Basic or FTDI cable to load code.

Features

  • ATmega328 microcontroller with Optiboot (UNO) Bootloader
  • USB Programming Facilitated by the Ubiquitous FTDI FT232RL
  • Input voltage - 7-15V
  • 0-5V outputs with 3.3V compatible inputs
  • 14 Digital I/O Pins (6 PWM outputs)
  • 6 Analog Inputs
  • 32k Flash Memory
  • 16MHz Clock Speed
  • All SMD Construction
  • R3 Shield Compatible

Included

1 x Arduino-Compatible PTH Kit PCB

1 x ATMega328 with Optiboot bootloader

1 x MCP1700 3.3V Voltage Regulator

1 x 5mm Green LED

1 x 5mm Red LED

2 x 330Ohm Resistor

2 x 10kOhm Resistor

1 x 16MHz Crystal

2 x 22pF Ceramic Capacitors

5 x 0.1uF Ceramic Capacitors

2 x 10uF Electrolytic Capacitors

1 x LM7805 5V Regulator

1 x Diode 1N4001

1 x Resettable Fuse PTC

1 x 28-Pin DIP Socket (To seat your ATMega)

1 x Push Button Reset Switch

2 x 6-Pin Female Headers

2 x 8-Pin Female Headers

1 x 6-Pin Right Angle Header (To connect your FTDI Basic)

1 x 0.1uF Capacitor

1 x DC Barrel Jack

Resources

All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.
Products may differ from pictured.
All trademarks and trade names are the properties of their respective owners. Wiltronics disclaims any proprietary interest in trademarks and trade names other than its own.

We use cookies to ensure you have the best experience on our site. If you continue to use this site you consent to the use of these cookies. OK

Find out more in our Privacy Policy